Dual LCD Monitor Stand Desk Clamp Holds up

Buy 2 Stands for a Horizontal Quad Stand. The space between the monitors is fully adjustable. Easy to install and sets up in minutes. This LCD Monitor Pole with Double-Link Swing Arm provides a...read more

$.
$49.98

Average Customer Rating

   5 out of 5
Bookmark and Share

Product Features

  • Holds up to 22 inch lcd wide screen monitors
  • Fully adjustable
  • Easy to install Desk clamp
  • Vesa compatible

Product Description

Buy 2 Stands for a Horizontal Quad Stand. The space between the monitors is fully adjustable. Simple to install and sets up in minutes. This LCD Monitor Pole with Double-Link Swing Arm provides a secure and elevated position for two flat-screen monitors to help free up valuable desk and work space. It's fully adjustable tilt, rotate, side-to-side, height, and tension settings enable a comfortable and productive viewing position that helps reduce eye fatigue, neck, and back strain. LCD monitors can be easily rotated around the pole to allow others to view presentations and other multimedia from nearly any direction. Durable die-cast aluminum construction and a sturdy clamp provide a quick, simple, and secure mount to a desktop or other horizontal surface. Ready to install with included hardware, there's no need to drill holes into desks or countertops FEATURES 36 double-link swing arms optimize ergonomics and monitor views with separate tilt, rotate, side-to-side, height, and tension adjustments -- Die-cast aluminum pole with heavy-duty clamp mounts to desktop or other surface -- Simple installation ideal for office, studio, IT network, and security applications - no drilling required - fits monitors up to 22 and 13 pounds each SPECIFICATIONS Fits 75 x 75 mm / 100 x 100 mm VESA-compliant monitors -- Monitor weight capacity: up to 13 lbs. each; 26 lbs.total -- Installs on horizontal surfaces up to 3.5 in. thick DIMENSIONS Height (pole): 18 in. -- Circumference (pole): 4.5 in. -- Arm length (radius): 15.5 in. -- Arm width (extended): 36 in. -- Weight: 14 lbs. PACKAGE CONTENTS LCD Monitor Pole with Double-Link Swing Arm -- Cable management clips and trim caps -- C-clamp with thumb screws (2) and mounting screws (2) -- Monitor mounting screws (8) -- Installation hardware with instructions and hex tool ....read more

Related posts:

  1. Free Standing Horizontal Dual/Two LCD Monitor Stand Holds T
  2. Deluxe Triple Monitor Stand Desktop Clamp Supports up T
  3. MountIt Articulating Dual Arm Computer Monitor Desk Mount Mount-

Related posts brought to you by Yet Another Related Posts Plugin.

Product Details

Brand: MonMount
Model: LCD-194
UPC:
Product Code: LCD-194

30 Responses to “Dual LCD Monitor Stand Desk Clamp Holds up”

  1. Jae McK says:

    Brilliant Product
    Rating:5 out of 5 stars
    I like this product. It makes my workspace feel like a command station. It was also simple to set up.

    Jamie

  2. Koda R. Merkley says:

    Fantastic bang for the buck!!!
    Rating:5 out of 5 stars
    Dual LCD Monitor Stand Desk Clamp Holds up to 22″ Lcd Monitors NEW

    Very sturdy and nicely engineered to offer a wide versatility in monitor configurations. Along with piece of mind knowing that your displays are securely held.

  3. Scott D. Tatman says:

    Perfect
    Rating:5 out of 5 stars
    The reviews were dead on….this is the most bang for your buck. I’ll likely buy another one because I’d like to have 4 monitors going….anyway, this is the one you want.

  4. D. Marks says:

    Awesome Value!!!
    Rating:5 out of 5 stars
    I held off purchasing a dual monitor stand because of the high prices, but this product is an incredible deal! Setup was simple and it supported my 19″ and 17″ monitors without a problem. I would recommend this to anyone!

  5. Richard W. Dillon says:

    Just as Advertised!
    Rating:5 out of 5 stars
    This stand is superb! I have two identical 20″ Acer monitors mounted and it is solid as anything! I was concerned with the mounting mechanism when I seen the pictures, but its heavy! It’s not something that is going to fold under the weight it states it will hold. Overall a fantastic monitor stand!

  6. Steve Lindhorst says:

    Very high quality monitor stand. Very pleased customer.
    Rating:5 out of 5 stars
    This monitor stand has to be one of the best products I’ve ever bought. I could not believe the quality for the price. It is outstanding!

    Nice sturdy steel parts, simple to place together and set up. Even the screws to secure the monitors were supplied. I don’t review products very often, but this was such a fantastic buy that I had to spread the word.

  7. AussieDan says:

    Very well built monitor stand
    Rating:5 out of 5 stars
    This stand is extremely solidly built with no flimsy plastic parts and has no distress holding 2 23″ monitors. The packaging lists up to 6kg/24″ monitors and I have no doubt it would support a pair of 24″ monitors without a problem.

    The design on the arms does mean that it won’t sit flush with the wall, as shown in some of the customer images. My desk is now about 3″ from the wall to allow enough space for the arms.

    Overall I’m very pleased with the product, and the price through OutletPC was fantastic.

  8. Drew Mcmanus says:

    brilliant quality
    Rating:5 out of 5 stars
    This stand delivered everything it promised. It features heavy, study design and is a snap to install. The shipping charges were pricey but the cost makes up for the difference. I can adjust both monitors with one hand and small effort. After looking around at othr models for a few days, this was – without a doubt – the best deal around.

    The only drawback is the retailer does not deliver a tracking number unless you question. I would recommend it to anyone looking for a high quality, fully functional, dual monitor stand.

  9. D. R. Fountain says:

    For the Price, It’s Unbeatable
    Rating:5 out of 5 stars
    Well, I have absolutely nothing but excellent things to say about this stand. Normally, I don’t write a lot of reviews unless something is very terrible, or very excellent. This falls into the latter category.

    Was going to buy a stand similar to this from a competitor (online computer store) and really found the same stand they were selling for $60 less on Amazon. So, I did some additional checking, and found this with the glowing reviews. So, I thought for the price, I would give it a try. With shipping, it worked out to a tad over $50. Arrived at my doorstep in four days in excellent condition and packed appropriately. Don’t expect a lot of peanuts or stuff like that in the packaging, but it’s a SOLID STEEL stand, so how’s it going to get hurt in transit?

    The stand is extremely sturdy, and every single part is heavy steel and well constructed. It comes with a single picture sheet of instructions, which is excellent enough to place it together. Some people have noted that they needed two people to do this, but I didn’t have any issues with it. Laid the monitors on my bed and mounted the bracket that way, mounted the pole to my desk, and then dropped the pole in. No problems doing it myself at all. Perhaps they were trying to mount the monitors after they attached the arms to the desk? Certainly not the way to go.

    Arms are fully adjustable once you get everything done, and it has cable management clips to route everything off the monitors.

    If you’re looking for a stand, don’t hesitate, follow the reviews, and get this.

  10. David T. Maurice says:

    Dual LCD Monitor Stand
    Rating:5 out of 5 stars
    This is an brilliant buy!! I bought another brand a year ago at a higher cost and it is not as excellent as this. Long shaft allows many height adjustments not available on others. Very sturdy and simple to setup. Nice professional black look too. I would buy again.

  11. Genghis Karimov says:

    Fantastic stand, awesome price
    Rating:5 out of 5 stars
    Took 10 minutes to set up and get going. No fuss, no problems. I have browsed several other sites (including newegg, frys, some ergo sites, etc), and haven’t found anything for as price as excellent as this one.

    I have two 23″ Samsung LCDs, this mount holds them comfortably.

  12. GBLSYS says:

    Certainly fits 24″ monitors, with room to spare
    Rating:5 out of 5 stars
    I just wanted to let you know that even though it is described as up to 22″, it easily fit two 24″ wide screen (1920×1200) Samsung monitors side by side, with room to spare, i.e. I can separate them a bit.

    I also agree that it is very sturdy, seems very well built, and was very simple to set-up and mount the monitors.

    Brilliant buy at $39 (but watch out, sometimes Amazon picks a seller that sells it for $139 plus $30 SH)

  13. J. You says:

    Don’t hesitate if you need a dual monitor stand
    Rating:5 out of 5 stars
    Previous reviews say it all. VERY, VERY beefy stand. Can’t believe the price on this thing is so cheap (bought through OutletPC). This can easily be mistaken for a $125+ stand.

    A couple of somewhat dissenting points though.

    1. Although the stand allows vertical adjustment of monitors, it’s an all or nothing proposition. Each monitor’s height cannot be adjusted individually (but, each monitor can be independently tilted and swiveled in every usable direction). This can be a very, very minor annoyance if you’re using two monitors with differing mounting locations as one monitor might wind up being too high and/or the other too low. This is my situation, but I’m sure I’ll get used to it.

    2. As a couple of other reviewers said, the clamp on this stand requires a lot of clearance on the underside of the desk; it’s ideally suited for tables and desks with an open backside. If the back of your desk is blocked off though, depending on the material, you don’t have to resort to cutting a huge chunk of it out to clear the clamp. The clamp is made of two parts so you can really leave the bottom part off and just bolt the actual stand to the back of the table. I posted a picture of the instructions, and you can see from Step 1 how the clamp is assembled and get an thought of the solution I propose.

    These are both super, super minor issues though and should not prevent you from buying this stand.

  14. A. Schmid says:

    Set up in 10 minutes! 24 inch monitor no problem…
    Rating:5 out of 5 stars
    I have an HP w2408 (24 inch) and a no name 17 inch mounted and it works fantastic! The auto rotate feature built into the monitor works even better now. The cable management is a small light, but nothing some black zip ties won’t fix. I had it set up in 10 minutes. This is including the time to remove the monitors from the computer and removing their original stand. The only pain was lifting both monitors and the stand into place. Can’t beat this for the price.

  15. Timothy Jackson says:

    Brilliant, solid stand at a reasonable price
    Rating:5 out of 5 stars
    This is a fantastic stand – more sturdy and jiggle-free than most I have seen at less than half the price of the competition. You do need to use a wrench (included) to adjust it, but that means that your monitors don’t go in use. I have a 22″ widescreen horizontal with a 19″ widescreen vertical beside it and it works wonderfully.

    Very highly recommended!

  16. Sam Wise says:

    Brilliant buy!
    Rating:5 out of 5 stars
    Very well-built, sturdy construction. Thick gauge steel construction with solid powder coating. Installed a pair of 22″ Acer X223w LCD screens with no problems. Incredible price for something so well-built.

  17. EEProf says:

    Fantastic buy
    Rating:5 out of 5 stars
    Pros:

    Solid construction

    Each articulation joint has a “tighten-able” bolt

    Desk clamp will accommodate varying desk thicknesses

    Cheap – Fantastic value for the cost

    Cons:

    The wire management clips on the arms are a small weak

    Monitors are not individually height adjustable relative to each other

    Other Thoughts:

    I’m currently using this stand with a 28″ LCD and a 24″ LCD, both wide screen. With two 28″ wide screen LCD’s (which I plot to do), the monitors will just fit with both in landscape orientation. Make sure to watch the weights of your monitors though. An over weight monitor (my 28″ is only 16.3 lbs and does fine) will cause the tilt joint to give out and your monitor will be facing downwards. This joint is also “tighten-able” with the included hex wrench, so its a manageable issue.

  18. William M. Finnegan says:

    Fantastic Product
    Rating:5 out of 5 stars
    I have had this set up for several days now. And it will hold 2 24″ monitors set up with a slight angle. As I was shopping for monitors I wasn’t sure if I should try to fit 2 24″ on this but it holds them just fine. The stand is well built, very simple to set up, and costs a fraction of what other stands cost. I bought this stand weeks before I had the monitors just because I figured it will raise in price as time goes on. So basically I wanted to do this review to let everyone know you CAN fit 2 24″ monitors on this stand with room to spare. The model monitor I am using is the Asus VW246H. I like this setup!

  19. W Woody says:

    Fantastic product at right price
    Rating:5 out of 5 stars
    I was worried this item at this price would not be a quality product, when I compared it to other more expensive dual monitor mounts. The item arrived quickly and was a breeze to assemble. It gives you ability to adjust height and orientation of the monitors,(portrait or landscape). The cables are stored via supplied clips to make the cords managable. You can seperate the monitors or align the side by side. It is solid steel construction and is rock solid,but not too heavy.( I worked in a metal fab shop, so I know excellent metal fabrication).

    If you have any concerns , as I did, because of the price, do not worry.Dual LCD Monitor Stand desk clamp holds upto 22″ lcd monitors NEW

  20. L. M. Cardwell says:

    Excellent Quality for a low price
    Rating:5 out of 5 stars
    I ordered from Outlet PC and it took about 5 days to the east coast. The monitor arms are very well built. Solid steel. The allen wrench included tightens the joints without stripping. Very simple to install. I looked at many different styles before choosing this one. Theres no need to pay more. These are very excellent quality. My only complaint is Outlet PC doesnt email the tracking number.

  21. KWJ says:

    Fantastic dual-monitor stand and awesome price
    Rating:5 out of 5 stars
    I did a lot of research on monitor stands, and like the other reviewers here, didn’t want to pay more for a stand than I paid for the monitors. Everything I read about this stand looked fantastic, so I ordered. I’m so glad I did. It took me less than 20 minutes to unpack it, assemble it and attach my monitors. It was super simple to install, comes with all the tools and screws you need, and will fit any monitor up to 22 inches I reckon. I now have my two monitors up off my desk, made more desk real estate to use, and now have my monitors at the perfect height to eliminate neck strain from looking down at the incorrect angle all day. I highly recommend this stand. Plus, the shipping was lightning quick, I had it within two days in California. Highly recommend the stand and the company.

  22. Nick Campbell says:

    excellent stand but takes too much space
    Rating:4 out of 5 stars
    this product is fantastic, i am currently just holding a 19″ widescreen with it and the other mount is open until i get my second monitor and it does hold up fantastic, verry verry sturdy, i have it mounted on a glass desk and it is padded by the way on the top so it wont cause the glass to chip or give any where.

    i did but add a 2 by 4 piece of wood under it to give it more support otherwise it would probably break my desk

    but one of the problems ive found is that your desk has to be went a pretty excellent distance away from the wall in order for the monitor to set back all the way, rite now mine is about 12 inches extended because i just cant go my desk any more or else there would be no room for my chair in here, lol

    so its going to take some geting used to but what i really like about it is that if im playing my game and want to watch tv a small bit or just set sideways instead of straight at my desk i can do that and just go the monitor into place.

    its going to be really nice once i get the second monitor and i notice when you type or go the desk ofcorse the monitor moves a bit too but i guess it all depends on how stiff your desk is but its no huge deal really.

    there is another cool small thing about this stand and it is the wire clamps under the swing arms that hold your vga/dvi cable and power cable with ease and leaves them with enough room to go when u go the monitor

    anyway i gave it 4 stars out of 5 because of the space issue

  23. Stephen Smith says:

    Fantastic Stand for Multi-boxing also
    Rating:5 out of 5 stars
    as many has said, this is a very sturdy stand. There is no worries from the clamp, it is very strong.

    What I like, Is I was able to take my 22″ widescreen, place it on portrait, and run two instances of WoW one on top of the other. Then It was simple to use the other monitor a 19″ widescreen for the main account.

    This really does help simplify Multiboxing as the distance to mouse over to the different accounts is cut drastically.

    I highly recomend this to others, not only for Multiboxing, But also for those who need more then one monitor in there work, or at play.

  24. ydant says:

    Incredible value. Quality build, lots of adjustability, and sturdy. The best value for a hardware buy I’ve had in a while.
    Rating:5 out of 5 stars
    This is an impressively well-valued monitor stand. For ~$50, you get a very sturdy stand that will mount on a desk anywhere from close to 6″ inches thick to the desk pictured, which is less than 1/2″ thick. The stand offers significant adjustment:

    1) Vertical – monitors can go as high or as low as the entire length of the pole

    2) Rotation – the entire assembly can be easily rotated on the central pole

    3) Shoulder, Elbow, Wrist – both monitors can swing on three independent hinges on the horizontal axis, accommodating a wide range of monitor sizes and positions.

    4) Individual monitor rotation and tilt – allowing for monitor orientation and viewing.

    The build quality of this mount impressed me, especially given the price. The materials are solid, well coated, and all of the sharp bits are covered or properly smoothed. The hinges feel stiff but pliable and don’t give any hints of premature failure. The manual says no more than 16lbs per monitor, but this feels like it could handle twice that.

    The mount is shipped with minimal installation required – simply screw two screws for the clamp and then clamp to the desk using two (already attached) eye-hook long bolts. Slide the mount over the pole and use the supplied allen wrench. Oh, and that wrench is no Ikea number – this thing is hefty and has a rubber coated handle. Impressive.

    The monitors mount using standard VESA mount and have provisions for two different mount sizes. The kit includes 8 screws, although my Dell monitors had the four screws already. You will need a Philips head (or similar) screw driver.

    I strongly recommend this monitor if you have a pair of LCD monitors and can clamp it to the back of your desk. Reclaim the desktop space and get some better vertical adjustment.

  25. Whisperer says:

    Fantastic for identical monitors
    Rating:4 out of 5 stars
    The dual monitor stand is sturdy and well built. Allows plenty of adjustments, tilt, swivel, height, etc. All but the height adjustments are independent of each other. The only issue I encountered was that different model monitors could not be height adjusted independently to line up. Other than that, the stand has fantastic flexibility and is well built, and for the most part, comes pre-assembled.

  26. C. Meriam says:

    Solid, strong, and top notch value!
    Rating:5 out of 5 stars
    I received my stand yesterday, and I am very impressed. It has a very simple, sturdy design that allows for a lot of movement and alignment of my two monitors. It took me no more than 10 minutes to place it together and have my monitors mounted.

    What really amazes me is the fantastic price for this well-constructed mount. I’ve seen many single arm mounts for for three times as much. This was an brilliant choice and I highly recommend it!

  27. Dustin Alan says:

    Incredible product – Look no further
    Rating:5 out of 5 stars
    I am a heavy computer user and edit video plus websites. I have been missing one of these stands for a long, long time and thank God it did not cost me $100+ !! Brilliant build quality and at this price how can you go incorrect. Wish I had one of these a long time ago.

    Got mine the next day from cputopia. Superior product. Do not spend $100+

    Be careful if mounting this to a thin desk, or one with an odd back to it. I had to use a 2×4 for support, this thing is heavy with two 22″ displays. I chose to cut a hole in my desk to mount it where I wanted. My desk is also 3 feet deep, which is huge for a desk.

  28. Rawn Mashburn says:

    Best Solution Available Period!!!
    Rating:5 out of 5 stars
    I must admit when I bought this item I was a bit skeptical. How could a Dual LCD Monitor Stand that supports 22 inch LCDs cost only $40 when other sources cost $150 or more?

    I read the reviews and noticed solid feedback. I chose to take a chance. Afterall, I was only risking $40:).

    I received my dual monitor stand in about 3 days. The stand is made with quality material. It only took me about 10-15 minutes to assemble and install my 22 inch Acer AL2216W LCDs.

    If you have a desk that can use a clamp for installation this is the best solution available period!!! And, it costs 3 to 4 times less than other solutions.

  29. D. Dellsperger says:

    Awesome AND cost effective
    Rating:5 out of 5 stars
    This monitor mount is incredible!! I installed it in a few minutes, it’s pretty self explanatory, everything needed to install is included (except the monitors and desk) It cleared up a tremendous amount of desk space.

    Pros:

    Moves the monitors from off the desk itself, uses very small desk space.

    The monitors can swivel on the stand.

    Cable management on the arms them.

    Sturdy setup.

    Can support monitors larger than 22 inches(widescreen).

    Can’t beat the price.

    Cons:

    Since the mount can hold monitors larger than 22 inches, the arm is not able to be straight and therefore makes the monitors come closer to the edge of the desk, which is excellent for sitting posture, but not fantastic when you want more desk room.

    Not super simple to adjust the height.

    All-in-all, this monitor mount is incredible, it holds both of my acer x223w monitors and replaces the horrible stands that came with the monitors themselves. I also was able to reclaim a lot of my desk space with this. I would certainly suggest this to everyone who stumble’s upon this product, I’ve already suggested it to many of my friends.

  30. Patrick Berteaux Ufaco says:

    No risk
    Rating:5 out of 5 stars
    Received today after simple 3/4 days. Simply perfect. Packaging, ratio price/quality really wonderful.I was really hesitated with models over $170.00. Close your eyes and buy straight away. A simply brilliant deal. Thanks Vendor. Congratulations.

Have A Question?

Are you looking for something but can not find it, or have a question for us? We would love to help you. Just fill out the form below and we will get back to you as soon as possible.